how to speed up my tp link router

Usually, the speed of the TP-link router will decrease due to the wireless signal and imbalanced speed range. The maximum tendency of the TP-link router is of 5GHZ bandwidth beyond that there will be some weakness in the signal. Also in 2.4 GHz, the wireless signal higher frequency is obtained.

What to do:

When you notice weak signal in TP router then try out these given steps to have strong wireless signal besides visit http //tplinkrepeater.net/. That is,

Place the antenna in the right place:

To have a flow of wireless signal locate the antenna in the position of 45 degrees this enables the more efficient connection. Beforehand check whether the antenna is perfectly covered under the signal range. Get tips and tricks for having the safe networking.

Neglect some additional source:

The physical interfaces which come under the wireless connection like a wall, some other signal like radio must need to restrict. The devices and tools which create signals tend to interfere with the wireless signal intended for the coverage.

And so keep a distance from the thing which is made with rigid of metals.

Inbuilt settings:

Even your place and set all the solutions some settings made in router cause to decrease the wireless signal. Thus follow the given steps such as,

Step 1:

Go to the option of Wireless and then click on the Wireless Settings

Step 2:

In that, the default option called Auto will be presented

Step 3:

There you want to set the range like 1, 6 and 11

When you do these methods then you can be easily escaped from the wireless interference. Significantly try to upgrade the TP-link router using antennas or any wireless tools. Still to clarify any doubts regarding router speed then visit http //tplinkrepeater.net/ there some procedures will be given to improving TP-link router speed.  

192.168.1.1 ADMIN LOGIN TP-LINK NOT WORKING

About TP-LINK:

The TP-LINK wireless router is a networking device which connects two or more networks and forwards data packets between them.

The TP-Link or some other brand's router will enable connecting the residential or office network (LAN) with the internet (WAN). Depending upon the router model either wired or wireless or both kinds of devices are supported on the LAN side allowing computers or devices to be connected to the router through a wired network or a wireless network. On the WAN side, the router can have an Ethernet Port where the incoming internet connection can be terminated. The TP-LINK wireless router has a 300Mbps wireless speed ideal for interruption sensitive applications like HD video streaming. Two antennas significantly increase the wireless robustness and stability and secure wireless security encryption at a push of WPS button. Check out the way to check the internet connection in different operating systems.

TP-LINK NOT WORKING:

·        The simplest way to access your router IP login page (e.g., 192.168.1.1)

·        Before starting, make sure your device already connected to the router network

·        Visit TP-LINK wireless router login web interface.

·        Find Your Router IP Address on the Auto detect router IP address box or click here

·        Click Open to Login, it will open TP link router login windowdialogue

·        Insert your router username and password.

You can't access 192.168.1.1 is just because you have started the incorrect username and password. Make sure; you have registered the right username and password. You have a default username and password on the router's user guide. You can apply them. In case, if you are not taking it, then 192.168.1.1 is not your router's IP address.

Find your IP using the following method.

For Windows OS

·        Go to Start option

·        Choose Run (windows button plus R).

·        Type "cmd" and press OK.

·        In the Command prompt option, type "ipconfig" and click Enter.

·        It will show your default gateway.

For UNIX and Linux OS

·        Go to Applications > System Tools > Terminal.

·        When the terminal is opened, type "in a course."

·        It will show you something like this.

For Macintosh OS

·        Go to Finder > Applications > Utilities > Terminal. Application.

·        When the terminal initiated, type "netstat – nr."

It will show you something like this

By this way, you can find your original IP address. Now, try applying the right username and password and access it.

ASUS WIRELESS ROUTER SETUP RT-AC68U

Asus rt-ac68u:

ASUS router login RT-AC68U supports combined dual-band data rates of up to 1900Mbps. 1300 Mbps 802.11ac at 5 GHz gives Gigabit wireless data rates, while Broadcom TurboQAM technology super-charges 2.4 GHz 802.11n performance from 450 Mbps to 600 Mbps with compatible devices.

Powered by a dual-core processor, ASUS router login RT-AC68U eliminates the performance drops that plague other routers with busy networks. So even on the most active home networks, HD video streaming is always smooth, the latency low for online gaming and VoIP calls, and file downloads are never interrupted.

Asus RT-AC68U Setup:

1.      Three cables will need to be connected:

·        Connect a DSL modem to the WAN gate on your ASUS router; marked with a globe with a ring round it (this port is blue).

·        Correlate another Ethernet cable from your machine to any one of the LAN ports on the router; (these ports are yellow).

·        Finally, attach the power wire to the wall socket and the DCIN port on the router (shown in green).

2.     Once everything is connected, press the power button on the back of the router (shown in red).

3.     Once the router is switched on, open a web browser. The ASUS router login rt-ac68u setup page may automatically open.

4.     If prompted to Asus router login rt ac68u to the router, enter admin as both the username and password, and then click OK on the screen.

5.     The primary setup page will open, click the GO button.

6.     Enter the wanted username and password for the router administrator in the corresponding boxes, and then click Next.

7.     Enter the desired network name (SSID) and network key (password) into the corresponding boxes, and then click Apply.

8.     A configuration summary will appear, showing the new settings. Click the Next button.

9.     A login prompt will arrive, enter the credentials and click OK.

10.                        The settings side for the router will open and Click the Logout button.

11.                        Click OK on the confirmation box to log out. Setup is now complete. Here is an information regarding the good guest wifi password.

Conclusion:

If routers aren't fast, they're slow. This device is the earlier, delivering extremely high data rates at both short and long range, across all channels.