Back up my D-Link DAP-1520 Wi-Fi Extender

Dlink 1520 wifi extender device is used when you need wifi connections for all computer devices that you have for your network. When you do not have these kinds of wifi extender devices, you will need to get one more http dlinkap local login router device for wifi access.

Once you configure dlink 1520 wifi extender device, you will able to make settings for your device any time the login page. When you get problems with dlink 1520 wifi extender device, you will need to backup your device and there are very simple steps for have backup for dlink wifi extender device. Once you have backup for your dlink 1520 wifi extender device, you can reset your device using the reset button.

How to Get Backup for Dlink 1520 WiFi Extender Device?

1.     Connect dlink 1520 wifi extender with a computer.

2.     After that open web browser and fill http dlinkap local login address to the address bar.

3.     First fill dlink login user name and then fill dlink login password. Default login passwords can be used when you use your device login for first time or you have not changed the password yet.

4.     Click on “Management” button from the setup page.

5.     After that click on “System” button.dlink di-1750 router design explained.

6.     There you can select “Save Configurations to File” button and this button is used so that you can save configurations of your device in a file format.

7.     Select a location where you want to save configurations of your dlink1520 wifi extender device.

8.     After that you can reset dlink 1520 wifi extender device to all default settings. Press the reset button for few seconds and your can delete settings for your device easily.

These are the steps to have backup for dlink1520 wifi extender device.

   

Network sharing settings for your tplink

To change the network sharing settings you have to follow the steps as mentioned below. The issue is that the storage sharing option works in the case of enabling the CIFS protocol in the window because the router use to make the attached storage which appears as a network drive letter in the File Explorer.

Step 1: -Log into the web interface by launching the web browser in the system.

Step 2:-Here by moving to the left menu click on to the USB settings, then User account. Click on the edit to modify or click on the Add new user to add the new.

Note:-In the default settings you cannot delete the two items and the user name cannot be modified. You can add two more items besides that. In the case of two new items these can be deleted or Use name, Password, Storage Authority and FTP Access can be modified.

Step 3:-Now to make new settings effect you have to restart the network sharing service.

Some times windows may ask to stop the access to shared files after change the user account due to a recorded user account in the system.system time setting of tp link wifi routers

This can be solved by deleting it. To delete the same on your computer click on start then click on run in the search box.

If you are using the address 192.168.1.1 for shared file, then delete it with the use 192.168.1.1/delete/yes

If you used to visit the shared files by \\192.168.1.1\share name. Then delete the account on the computer with net use\\192.168.1.1\share name\delete\yes.

If the problem is still not solved the problem. In that case, the restart of the computer will help to solve. Here new login window will display then you have a login here with new account details.

Accessing TP-Link Wifi Extender Login Page

To login to the TP-Link Wifi Extender Login Page, you have to follow the steps mentioned below.

Step 1:-Connect the range extender with the help of Ethernet cable to your PC.

Step 2:-Open the web browser and type in the address page the domain name HTTP//tplinkrepeater.net admin.

Step 3:-After some time a login window will open and you have to enter "Admin" in user name and password to login into the page.

Step 4:-After successful login you will found quick setup start page. Click on the next to get the quick start of the page.

You should be login to the page now. If you do not log into the page now you have to check the pc correctly acquired the IP address from the range extender. To check the same you have to follow the steps mentioned below

1. Click on start and go to the control panel.default access on a tplink device.

2. Click “Network and Internet" then go to the "Network and Sharing Centres"

3. Click on "Local Area Connection" and select on details. You will get here the details of network connections.

4. The IP of your PCs "192.168.0 x" and the default gateway should be the "192.168.0.254".

After that make sure that the pc should obtain the IP address automatically by visiting HTTP //tplinkrepeater.net admin. By the steps mentioned below, you can check the same that PC supports the feature or not.

1. Click onto the start and how to control panel menu.

2. Click on network and internet after that go to network and sharing centre.

3. Click on the local area network option and select on the properties.

4. Tick on obtaining the IP address automatically and obtain DNS server address automatically.

If doing all these steps if you found that there is no any issue with settings but the PC still obtaining the wrong IP address then disable and then enable the network adaptor to get a new IP address.

Changing the Dlink router channel

Change the router channel requires when you face a network issue and searching for another network available waiting for the range. And you have to connect with these networks with your device. To change the channel of the router you can follow the steps mentioned below.

Step 1:-Enter the address HTTP dlinkrouter local in the web browser after open the browser. On the next page, it will demand the username and password. Let it blank and click on the login option.

Step 2:-On the top of configuration page click on setup page then click the wireless settings button on the left side.

Step 3:-Click on the option Manual Wireless Network setup here.

Step 4:-Here you have to disable the option “Enable Auto Channel Scan” box.

Step 5:-Here you need to select the channel from the drop-down menu. Forgetting the best results use channel number 1,6 or 11.how to dlink router as a switch

Step 6:-Click on to the option of saving settings to save all the settings you have made on the page HTTP dlinkrouter local.

Note:-In some of the cases most of the wireless adaptors find a wireless network automatically with the help of SSID you have assigned to the router. It will then automatically detect and lock onto the channel of the router. You only need to change the channel on the router. 

By changing the channel, you will find that now the router performing well and improved performance gives you better quality networks. So that you can make your experience better and use the networks without any disturbance in the system. You can check the performance and improve it again by changing onto another channel if found any type of error on the channels you have selected by changing one by one. Router channels are available in the systems and you can check the channels from here to select from them.